At my academical studies, I have focused on investigation of metal cutting processes with methods, including experimental and numerical approachs. The reports of results obtained from these studies were published as paper on international journals having prestige in the field of manufacturing. Some of these papers can be seen below.
UCUN İRFAN (2016). 3D finite element modelling of drilling process of Al7075-T6 alloy and experimental validation. Journal of Mechanical Science and Technology, 30(4), 1843-1850., Doi: 10.1007/s12206-016-0341-0
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ (2016). Finite element modeling of micro-milling: Numerical simulation and experimental validation. Machining Science and Technology, 20(1), 148-172., Doi: 10.1080/10910344.2016.1147650
ASLANTAŞ KUBİLAY,Hopa Ender,Perçin Mustafa,UCUN İRFAN,ÇİÇEK ADEM (2016). Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti6Al4V alloy. Precision Engineering, Doi: 10.1016/j.precisioneng.2016.01.009,
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ (2015). The effect of minimum quantity lubrication and cryogenic pre-cooling on cutting performance in the micro milling of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(12), 2134-2143., Doi: 10.1177/0954405414546144,
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ,GÖKÇE BARIŞ (2014). Effect of tool coating materials on surface roughness in micromachining of Inconel 718 super alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(12), 1550-1562., Doi: 10.1177/0954405414522217
Perçin Mustafa,ASLANTAŞ KUBİLAY,UCUN İRFAN,KAYNAK YUSUF,ÇİÇEK ADEM (2016). Micro- drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating. Precision Engineering, Doi: 10.1016/j.precisioneng.2016.02.015,
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ (2015). The performance Of DLC-coated and uncoated ultra-fine carbide tools in micromilling of Inconel 718. Precision Engineering, 41, 135-144., Doi: 10.1016/j.precisioneng.2015.01.002,
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ (2013). An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy. Wear, 300(1-2), 8-19., Doi: 10.1016/j.wear.2013.01.103,
ASLANTAŞ KUBİLAY,UCUN İRFAN,ÇİÇEK ADEM (2012). Tool life and wear mechanism of coated and uncoated Al2O3/TiCN mixed ceramic tools in turning hardened alloy steel. Wear, 274275,442-451., Doi: 10.1016/j.wear.2011.11.010,
UCUN İRFAN,ASLANTAŞ KUBİLAY (2011). Numerical simulation of orthogonal machining process using multilayer and single-layer coated tools. The International Journal of Advanced Manufacturing Technology, 54(9-12), 899-910., Doi: 10.1007/s00170-010-3012-9,
UCUN İRFAN,ASLANTAŞ KUBİLAY (2009). The performance of ceramic and cermet cutting tools for the machining of austempered ductile iron. The International Journal of Advanced Manufacturing Technology, 41(7-8), 642-650., Doi: 10.1007/s00170-008-1528-z,
UCUN İRFAN,ASLANTAŞ KUBİLAY,KARABULUT ABDURRAHMAN (2009). Investigation of Variation in Tool-Chip Contact Length in Orthogonal Cutting Process. Journal of the Faculty of Engineering and Architecture of Gazi University, 3(24), 477-484.,
ASLANTAS, K., ÇICEK, A., UCUN, İ., PERCIN, M., HOPA, H. E. (2016). Performance Evaluation of a Hybrid Cooling–lubrication System in Micro-milling of Ti6Al4V Alloy. Procedia CIRP, 46, 49 7th HPC 2016 – CIRP Conference on High Performance Cutting. 31 May-2 June, Chemnitz/Germany.
UCUN İRFAN,ASLANTAŞ KUBİLAY,ÇİÇEK ADEM,ÖZKAYA Ekrem (2015). 3D Numerical Modelling of Micro Milling of Ti6Al4V. Advances in Materials proceesing technologies (AMPT 2015 14-17 December Madrid /SPAIN).
ASLANTAŞ KUBİLAY,UCUN İRFAN,BEDİR FEVZİ (2012). Investigation of wear performance of coated micro end mills in micro milling. 15th international conference on machine design and production 19-22 June, Denizli/TURKEY.
UCUN İRFAN,ASLANTAŞ KUBİLAY,BEDİR FEVZİ (2011). The effect of coating material on micro end mill on tool deflection in micro milling. 6th International Advanced Technologies Symposium, 106-110. 16-18 May, Elazığ/TURKEY.
UCUN İRFAN,ASLANTAŞ KUBİLAY (2010). Investigation of Effect of Coating Material on Tool-Chip Contact Length in Orthogonal Turning of AISI 52100. International conference of sustainable life in manufacturing, 54-60. 24-25 June, Isparta/TURKEY.
UCUN İRFAN,ASLANTAŞ KUBİLAY (2009). Investigation of Performance of Carbide Cutting Tool in Turning Hardened 52100 Tool Steel. 5th International Advanced Technologies Symposium 13-15 May, Karabük/TURKEY.
UCUN İRFAN,ASLANTAŞ KUBİLAY,UCUN İSMAİL (2008). The modelling of machinability of AISI 1045 using ceramic cutting tools having different edge geometry. 13th international conference on machine design and production. 3-5 September İstanbul/TURKEY.